News Feeds

A typically fragile quantum superposition has been made to last exceptionally long, and could eventually be used as a probe for discovering new physics

Computer simulations of how influenza A moves through human mucus found it is ideally configured to slide through the sticky stuff on its way to infecting cells

In 1181, Japanese and Chinese astronomers saw a bright light appear in the constellation Cassiopeia. It shone for six months, and those ancient observers couldn’t have known it was an exploding star. To them, it looked like some type of temporary star that shone for 185 days.

In the modern astronomical age, we’ve learned a lot more about the object. It was a supernova called SN 1181 AD, and we know that it left behind a remnant “zombie” star. New research examines the supernova’s aftermath and the strange filaments of gas it left behind.

Though it was seen almost 850 years ago, only modern astronomers have been able to explain SN 1181. For a long time, it was an orphan. While astronomers were able to identify the modern remnants of many other historical supernovae, SN 1181 was stubborn. Finally, in 2013, amateur astronomer Dana Patchick discovered a nebula with a central star and named it Pa 30. Research in 2021 showed that Pa 30 is the remnant of SN 1181. The SN exploded when two white dwarfs merged and created a Type 1ax supernova.

SN 1181 is unusual. When supernovae explode, there’s usually only a black hole or a neutron star left as a remnant. But SN 1181 left part of a white dwarf behind, an intriguing object astronomers like to call a zombie star. Strange filaments resembling dandelion petals extend from this strange star, adding to the object’s mystery.

Researchers have gotten a new, close-up look at Pa 30 and published their results in The Astrophysical Journal Letters. The research is titled “Expansion Properties of the Young Supernova Type Iax Remnant Pa 30 Revealed.” The lead author is Tim Cunningham, a NASA Hubble Fellow at the Center for Astrophysics, Harvard & Smithsonian.

“The recently discovered Pa 30 nebula, the putative type Iax supernova remnant associated with the historical supernova of 1181 AD, shows puzzling characteristics that make it unique among known supernova remnants,” the authors write. Pa 30 has a complex morphology, including a “unique radial and filamentary structure.”

The hot stellar remnant at Pa 30’s center is also unique. Its presence, as well as the lack of hydrogen and helium in its filaments, indicates that it’s the result of a rare Type1ax supernova. Since hydrogen and helium make up 90% of the chemicals in the Universe, objects without either of them are immediately interesting.

In this research, the astronomers used the Keck Cosmic Imager Spectrograph (KCIS) to examine the 3D structure and the velocities of the filaments. The KCIS was built to observe the cosmic web, the intricate arrangement of gas, dust, and dark matter that makes up the large-scale structure of the Universe. The gas and dust are extremely dim, and the KCIS was made to perform spectroscopy on these types of low surface brightness phenomena. That makes it a powerful tool for observing the strange filaments coming from Pa 30.

KCIS is a powerful spectrograph that can capture spectral information for each pixel in an image. It can also measure the redshift and blueshift of objects it observes, meaning it can determine their velocity and direction of movement. The researchers were able to show that material in the filaments travelled ballistically at approximately 1,000 kilometres per second.

These three panels from the research are velocity maps of ionized sulphide emissions in Pa 30’s filaments. The upper panel shows the detected redshift and the middle panel shows the blueshift. The bottom panel is a combined velocity map for all the filaments. Image Credit: Cunningham et al. 2024.

“This means that the ejected material has not been slowed down, or sped up, since the explosion,” said lead author Cunningham. “Thus, from the measured velocities, looking back in time allowed us to pinpoint the explosion to almost exactly the year 1181.”

Pa 30 has some unusual features. It’s unusually asymmetrical, while most SN remnants are more spherical. Its filamentary structure displays significant variation in ejecta distribution along the line of sight. Some filaments are more prominent than others and extend further, creating an irregular and lopsided appearance. Some parts of the nebula are travelling at different speeds and in different directions. Elements in the nebula are also distributed unevenly. Iron, for example, is far more concentrated in some regions than others. All of these features suggest that the initial explosion mechanism was asymmetric and that the ejecta in the filaments stem from the initial explosion observed in 1181. Pa 30 also has a very sharp inner edge with an inner gap that surrounds the zombie star.

Two Wide-field Infrared Survey Explorer (WISE) images of Pa 30. The one on the right has the filaments overlain. The inner nebula is compact and surrounds the massive, hot, white dwarf zombie star. The outer nebula is characterized by the wispy filaments that extend out from the central region. Image Credit: Cunningham et al. 2024.

Many of Pa 30’s features suggest an asymmetric explosion as the cause. “The ejecta show a strong asymmetry in flux along the line of sight, which may hint at an asymmetric explosion,” the authors explain. The researchers found that the total flux from redshifted filaments is 40% higher than from blueshifted filaments. “This is tantalizing evidence for asymmetry in the explosion,” they write.

An asymmetric supernova explosion suggests that the underlying physics are complex. Rotation, complex magnetic fields, and the presence of a stellar companion can all contribute to asymmetry. Coupled with the unusually hot white dwarf left behind and its high-velocity stellar wind, the evidence suggests that it was a Type 1ax supernova.

That means the zombie star is likely the remnant of a failed thermonuclear explosion in a white dwarf. The white dwarf could have been just below the Chandrasekhar mass and not exploded completely. Or it could’ve been one of the theoretically possible but elusive super-Chandrasekhar mass white dwarfs. These objects are of great interest because they could be the cause of unusually bright supernovae. If Pa 30’s progenitor was a super-Chandrasekhar mass white dwarf, it could explain some of the remnant’s unusual characteristics.

“Our first detailed 3D characterization of the velocity and spatial structure of a supernova remnant tells us a lot about a unique cosmic event that our ancestors observed centuries ago. But it also raises new questions and sets new challenges for astronomers to tackle next,” said co-author Ilaria Caiazzo.

Some of the questions could be answered with more Keck Cosmic Imager Spectrograph IFU observations.

“Further IFU spectroscopic observations with wider coverage of the nebula will confirm if there exists a global asymmetry in the nebula ejecta, providing important constraints on dynamical models of the ejecta,” the authors conclude.

The post This Ancient Supernova Remnant Looks Like a Stellar Dandelion appeared first on Universe Today.

Lower cooling requirements, longer operating times, lower error rates: Quantum computers based on spin photons and diamond promise significant advantages over competing quantum computing technologies. The consortium of the BMBF project SPINNING coordinated by Fraunhofer IAF has succeeded in decisively advancing the development of spin-photon-based quantum computers.

Lower cooling requirements, longer operating times, lower error rates: Quantum computers based on spin photons and diamond promise significant advantages over competing quantum computing technologies. The consortium of the BMBF project SPINNING coordinated by Fraunhofer IAF has succeeded in decisively advancing the development of spin-photon-based quantum computers.

Researchers are finding new ways to make the hydrogen evolution reaction harder, better, faster, and stronger.

Researchers show that the improvements in signal strength during surface-enhanced fluorescence and Raman spectroscopy can extend even through a nanoscale protective layer. This research may lead to significant improvements in the sensitivity of biosensors and the development of novel point-of-care diagnostics.

In their peer-reviewed work, Calcea Johnson and Ne'Kiya Jackson present five new ways of proving Pythagoras' Theorem via trigonometry. They also detail a new method for finding proofs that yield at least five more.

Researchers have revealed the 3D structure of lab-made light-harvesting complex II (LHCII), a key component in photosynthesis. Using cryo-electron microscopy, they found that artificial LHCII closely mirrors the natural version, advancing research into solar energy harnessing and artificial photosynthesis technologies.

Researchers have invented a new way to align 3D semiconductor chips by shining a laser through concentric metalenses patterned on the chips to produce a hologram. Their work can help to lower the cost of producing 2D semiconductor chips, enable 3D photonic and electronic chips, and may pave the way for other low-cost, compact sensors.

The human genetic code is fully mapped out, providing scientists with a blueprint of the DNA to identify genomic regions and their variations responsible for diseases. Traditional statistical tools effectively pinpoint these genetic 'needles in the haystack,' yet they face challenges in understanding how many genes contribute to diseases, as seen in diabetes or schizophrenia.

Increasing amounts of data require storage, often for long periods. Synthetic polymers are an alternative to conventional storage media because they maintain stored information while using less space and energy. However, data retrieval by mass spectrometry limits the length and thus the storage capacity of individual polymer chains. Researchers have now introduced a method that overcomes this limitation and allows direct access to specific bits without reading the entire chain.

Increasing amounts of data require storage, often for long periods. Synthetic polymers are an alternative to conventional storage media because they maintain stored information while using less space and energy. However, data retrieval by mass spectrometry limits the length and thus the storage capacity of individual polymer chains. Researchers have now introduced a method that overcomes this limitation and allows direct access to specific bits without reading the entire chain.

Researchers have developed a new binarized neural network (BNN) scheme using ternary gradients to address the computational challenges of IoT edge devices. They introduced a magnetic RAM-based computing-in-memory architecture, significantly reducing circuit size and power consumption. Their design achieved near-identical accuracy and faster training times compared to traditional BNNs, making it a promising solution for efficient AI implementation in resource-limited devices, such as those used in IoT systems.

Improvements in three-dimensional (3D) scanning have enabled quick and accurate scanning of 3D objects, including cultural heritage objects, as 3D point cloud data. However, conventional edge-highlighting visualization techniques, used for understanding complex 3D structures, result in excessive line clutter, reducing clarity. Addressing these issues, a multinational team of researchers have developed a novel technique, involving independent rendering of soft and sharp edges in 3D structures, resulting in improved clarity and depth perception.

Improvements in three-dimensional (3D) scanning have enabled quick and accurate scanning of 3D objects, including cultural heritage objects, as 3D point cloud data. However, conventional edge-highlighting visualization techniques, used for understanding complex 3D structures, result in excessive line clutter, reducing clarity. Addressing these issues, a multinational team of researchers have developed a novel technique, involving independent rendering of soft and sharp edges in 3D structures, resulting in improved clarity and depth perception.

In earthquake-prone areas like Japan, there is a need for better prediction of soil stability to mitigate liquefaction risks. Towards this end, researchers have used machine learning models, including artificial neural networks and bagging techniques, to create accurate 3D maps of bearing layers using data from 433 locations in Setagaya, Tokyo. This approach can identify stable construction sites, enhance disaster planning, and contribute to safer urban development, making cities more resilient to liquefaction risks.

In earthquake-prone areas like Japan, there is a need for better prediction of soil stability to mitigate liquefaction risks. Towards this end, researchers have used machine learning models, including artificial neural networks and bagging techniques, to create accurate 3D maps of bearing layers using data from 433 locations in Setagaya, Tokyo. This approach can identify stable construction sites, enhance disaster planning, and contribute to safer urban development, making cities more resilient to liquefaction risks.

A team has developed a highly efficient alkaline membrane electrolyser that approaches the performance of established PEM electrolysers. What makes this achievement remarkable is the use of inexpensive nickel compounds for the anode catalyst, replacing costly and rare iridium.

A recent review suggests new temperature measuring technologies could make that process much simpler, amid growing agricultural challenges fueled by fluctuating climates.